How to inform even more
detailed about UNIMAT1?
The comprehensive handbook (included in CLASSIC case) is available for a token fee at every UNIMAT1 dealer or freely available
as pdf-download in our download section at http://www.thecooltool.com
Which material can be worked with UNIMAT1?
Saw: plywood up to 12mm, solid wood up to 8mm
Lathe: the complete kinds of wood, fibre-free plastics, soft and non-ferrous
metal up to the temper of brass
Turning Lathe: basically all kinds of wood are turnable, above all short grained
woods as beech and fruit woods turn out beautiful. For the beginner we recommend lime wood,
because it is relatively soft and has short grains which results in a beautiful surface. Even
soft metals can be worked freehanded.
Is it possible to work steel with UNIMAT1?
Actually not, some specialists turn steel at very slight linear machining, but we don’t recommend to.
From which age on do you recommend UNIMAT1?
BASIC: oofficially from 8 years, but if the kids are introduced by someone gradually,
it is possible sooner.
CLASSIC: officially from 12 years, skilled children and tinkerers, resp. those, who
have experience with UNIMAT1 BASIC, correspondingly sooner.
What is the range of tolerance?
BASIC: according to the fact, that everything is controlled freehand, it depends
on the users skill.
CLASSIC: handwheel scaling 0,1mm
MetalLine: with the MetalLine precision parts tolerance of < 0.1mm can be met
How long is the guarantee period?
Five years on everything, which obviously isn’t subject to wear and tear. Who wants
his blunt saw blade replaced after four years should have understanding that we present
him with the bill.
Why is the jig saw childproof?
The lift of the saw blade and so the cut movement of the teeth is only approx. 3mm. The
skin is capable to move this short distance and wont get hurt (tens of thousand times tested
and never needed a sticking plaster!). A cut into the material happens only when the materials
are rigid, like wood, plastics or metals.
What is the fundamental difference between UNIMAT1 BASIC and
UNIMAT1 CLASSIC?
BASIC is suitable for newcomers and creative, freehand artistic work. Everything that needs
a precision job with a die set slide is just the right type for UNIMAT1 CLASSIC.
How does the PowerLine differ from UNIMAT1 system?
The PowerLine is no stand-alone set like the BASIC or CLASSIC case, but an upgrade. With the stronger
motor it offers additional possible uses, like e. g. the circular saw. However the PowerLine applications
are not childproof.
How does the MetalLine differ from UNIMAT1 system?
As the PowerLine, the MetalLine is an upgrade for UNIMAT1. Here priority is given to increased precision,
which is particularly demanded for working of metals for machine model construction.
Is it possible to adjust the speed?
There are several possibilities: the included countershaft is equipped with two gear rims,
the motor turns up to 12.000 rpm. The cog belt laid onto the big gear rim of the
countershaft results in 2.000 rpm, onto the small gear rim 6.000 rpm. Every further
countershaft as accessory enables the increase resp. the reduction of power/speed by the
factor three. Another elegant possibility to adjust the rpm is the use of an adjustable transformer,
available at specialized dealers.
Is it possible to cut threads by use of UNIMAT1?
Actually not intended, but clever persons will always find ways and means.
Is it possible to drive UNIMAT1 through a computer?
Yes. Within the MetalLine the slides are also available CNC-ready. A drive software is available too.
